Fixing a bent USB connector isn’t a hard task to do. There are a lot of methods to fix the bent pins in a USB connector. So if you are facing this problem, there is no need to throw away your device or buy a new one. In this guide, we will disclose some proven methods to fix a broken or bent USB connector.
USB connectors are designed to connect properly, and if you try to connect it upside-down by applying too much pressure, you may end up bending the pins or breaking them apart. Here are some of the most working fixes to consider in these cases.
There are many reson behind the
Fixing a Bent or Broken USB Connector in Easy Steps
Follow any of these methods:
Use a Nose-Plier
You can easily fix the bent pins in a USB connector at home with the help of pliers. This is one of the most effective methods to straighten the bent pins of a USB connector. Hold the USB connector in your hands and gently move the bent pins back to their original position with the help of a plier.
Time to Replace the Terminal
If the above methods don’t help you fix your USB connector, it’s time to replace your USB terminal. But for this, you will need a donor terminal from a USB cable that you don’t use anymore.
Once you have the donor cable, splice it up will until you see the conducting wire in red, green, black, and white colors. Now remove the bent USB connector from your old cable and replace it with the new one. Make sure the wires match each other when you are joining them together.
Soldering the Pins
Sometimes bending the pins back to the original position might rip them apart from the motherboard of the USB connector. In this case, there is only one option left, and that is to solder the pins back to the mainboard. Well, this is a technical part and you need to do this carefully or you might end up losing your data permanently.
We highly recommend getting a new connector and attach it to the mainboard instead of repairing the older one. It is easy to find a USB connector in a computer scrap shop for free.
Take a good picture of your old connector and its soldered part so that you remember the sequence when installing the new connector. Now remove the older USB connector from the mainboard and attach the new one with the help of a soldering wire. You can also see the video below to get a better idea.
